CCG鎧裝防爆格蘭（CCG 0571-E1EX-U）

CCG鎧裝防爆格蘭（CCG 0571-E1EX-U Captive Component Cable Gland）
CCG防爆格蘭代理商：上海頤品自動化科技有限公司
關鍵詞：CCG非鎧防爆格蘭，CCG防爆密封接頭，CCG鎧裝防爆格蘭，CCG防爆填料函
CCG接管型防爆格蘭，CCG單密封防爆格蘭，CCG雙密封防爆格蘭， CCG帶填料膠水防爆格蘭
CCG防爆變徑接頭，CCG防爆堵頭，CCG防爆呼吸閥，CCG防爆轉接頭，CCG防爆接線盒等
CCG防爆格蘭代理商：上海頤品自動化科技有限公司
CCG E1EX-U Captive Component Cable Gland (0571)
CCG - Captive Cone Glands
Hazardous Cable Glands & Kits
Product overview

CCG E1EX-U Captive Component Cable Gland (0571)

CCG E1EX-U Captive Component Cable Gland (0571) is a Hazardous Area Glanding Device for Multi Armoured Cable. Suitable for indoor, outdoors, Group I, II, III, Zone 1, 2, 21 and 22 hazardous areas.

CCG Part Numbers: 057100-16, 057100S, 057100, 0571-0S, 0571-0, 057101, 057122, 057102, 057133, 057103, 057144, 057104, 057155, 057105, 057166, 057106, 057177, 057107, 057108, 057199, 057109, 057110

Features & Benefits

• For indoor, outdoors, Group I, II, III, Zone 1, 2, 21 and 22 hazardous areas.
• Freely rotating captive cone and inspectable cone ring provides an armour clamp and earth bond for steel wire, aluminium, braid and tape armour.
• Patented disconnect system that allows inspection of armour clamp and inner seal after assembly.
• Factory fitted captive elastomeric seals for Built-in SafetyTM. Seals on both inner and outer sheaths to IP66/68.
• Precision manufactured from high-quality brass (Marine Grade Electroless Nickel PlatedTM) available in stainless steel 316/316L on request. Supplied with a thread sealing gasket (parallel threads only).

CCG E1EX-U Technical Data

Type: E1EX-U (Universal)
Equipment Protection Levels: Ex db I/ IIC, Ex eb I/IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Steel Wire, Aluminium, Braided and Tape Armour
Armour Clamping: Rotating Captive Cone and Inspectable Cone Ring
Sealing Area: Inner Sheath and Outer Sheath
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

• IEC/BS EN
• IECEx
• ATEX
• UKEX
• INMETRO (Brazil)
• TR CU (Russia)
• CCC/CNEx (China)
• KCs (Korea)
• SANS/IEC
• Ingress Protection
• Deluge Protection
• Corrosion Protection
• Marine ABS
• DNV-GL
• ClassNK
• EMC Compatible

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such bs are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

---

Additional Technical Data on CCG E1EX-U Captive Component Cable Gland (0571) Part Numbers can be found on the table below. For Conbing Standards & Certificates as well as Fitting Instructions, please advise PDF File.

Technical Data：

上海頤品 Product Code	Gland Size Ref.	Metric Entry Thread (C)	Metric Entry Thread (Min D)	NPT Entry Thread (C)	NPT Entry Thread (Min D)	Cable Detail (Min A)	Cable Detail (Max A)	Cable Detail (Min B)	Cable  Detail (Max B)	Max  Length (E)	Armour  Dia (Min F)	Armour Dia (Max F)	Hexagonal Detail (Max Flats)	Hexagonal Detail (Max Crns)	Installation Torque Value (Nm)
057100-16	00-16ss	M16x1.5	15	-	-	3	8.5	5	10.5	60	0.2	0.9	25/27	28/30	21
057100S	00s-20ss	M20x1.5	15	½/¾	15	3	8.5	5	10.5	60	0.2	0.9	25/27	28/30	21
057100	00-20s	M20x1.5	15	½/¾	15	3	8.5	8	13.5	60	0.2	0.9	25/27	28/30	21
0571-0S	0s-20s	M20x1.5	15	½/¾	15	7	12	8	13.5	60	0.2	1.25	25/27	28/30	21
0571-0	0-20s	M20x1.5	15	½/¾	15	7	12	11.5	16	60	0.2	1.25	25/27	28/30	21
057101	1~20	M20x1.5	15	½/¾	15	9	15	12.5	20.5	73	0.2	1.25	30	34	21
057122	2s-25s	M25x1.5	15	¾/1	15/19	11	17.5	16	24.5	82.4	0.2	1.6	38	43	30
057102	2~25	M25x1.5	15	¾/1	15/19	14	20	18	27	82	0.2	1.6	38	43	30
057133	3s-32s	M32x1.5	15	1/1¼	19	15	22	20	30.5	91	0.2	2	45	51	42
057103	3-32	M32x1.5	15	1/1¼	19	19	26.5	23	33.5	91	0.2	2	45	51	42
057144	4s-40s	M40x1.5	15	1¼/1½	19/21	22	31.5	26.5	39.5	105	0.3	2	55	62	52
057104	4-40	M40x1.5	15	1¼/1½	19/21	26	34	28	40	105	0.3	2	55	62	52
057155	5s-50s	M50x1.5	15	1½/2	21	29	38	35.2	46.7	123	0.4	2.5	65	73	57
057105	5-50	M50x1.5	15	1½/2	21	34	44.5	44.4	53	123	0.4	2.5	65	73	57
057166	6s-63s	M63x1.5	15	2/2½	21/30	38	50	45.5	59.4	147	0.4	2.5	85	96	66
057106	6-63	M63x1.5	15	2/2½	21/30	44	56.5	54.6	65.9	147	0.4	2.5	85	96	66
057177	7s-75s	M75x1.5	15	2½/3	30/32	50	62	59	72.5	149	0.4	3.15	96	108	72
057107	7-75	M75x1.5	15	2½/3	30/32	56	67.5	65	78	149	0.4	3.15	96	108	72
057108	8-80	M80x2.0	20	3	32	59	69	65	77.5	195	0.4	3.15	96	108	80
057199	9s-90s	M90x2.0	20	3/3½	32/33	66	75	73	86.5	204	0.4	3.5	111	125	89
057109	9-90	M90x2.0	20	3/3½	32/33	74	81.5	82	91	204	0.4	3.5	111	125	89
057110	10-100	M100x2.0	20	3½/4	33/34	81	91	90	100	209	0.4	3.5	125	141	98

All dimensions except NPT are in mm. Intermediate thread sizes are available on request. NPT threads should be tightened ‘wrench tight’.

 

 

 

CCG鎧裝防爆格蘭（CCG 0571-E1EX-U Captive Component Cable Gland）
CCG防爆格蘭代理商：上海頤品自動化科技有限公司
關鍵詞：CCG非鎧防爆格蘭，CCG防爆密封接頭，CCG鎧裝防爆格蘭，CCG防爆填料函
CCG接管型防爆格蘭，CCG單密封防爆格蘭，CCG雙密封防爆格蘭， CCG帶填料膠水防爆格蘭
CCG防爆變徑接頭，CCG防爆堵頭，CCG防爆呼吸閥，CCG防爆轉接頭，CCG防爆接線盒等
CCG防爆格蘭代理商：上海頤品自動化科技有限公司
CCG E1EX-U Captive Component Cable Gland (0571)

FREE Technical Advisory Service：上海頤品自動化科技有限公司
EPIN Automation maintains a free technical advisory service.  E-mail：sales@epin-china.com
Contact us for enquiries concerning this and all other products，Tel: +86 13818772521
上海頤品自動化ABB防爆格蘭，Kopex防爆變徑，ABB防爆堵頭，Kopex防爆呼吸閥，ABB防爆格蘭附件
CCG防爆格蘭，CCG防爆變徑，CCG防爆堵頭，CCG防爆呼吸閥，CCG防爆接線箱，CCG防爆格蘭附件
Hawke防爆格蘭，Hawke防爆變徑，Hawke防爆堵頭，Hawke防爆呼吸閥，Hawke防爆接線箱及附件
CMP防爆格蘭，CMP防爆變徑，CMP防爆堵頭，CMP防爆呼吸閥，CMP防爆轉接頭，CMP防爆格蘭附件
Eaton防爆格蘭，Cooper防爆格蘭及接線箱，Capri防爆堵頭，Redapt防爆呼吸閥，Raxton防爆格蘭附件
Peppers防爆格蘭，Peppers防爆變徑，Peppers防爆堵頭，Peppers防爆呼吸閥，Peppers防爆格蘭附件